All About Plumbing Gazette Today

Plumbing Tips That Will Save Your Family Some Money

Feb 23

 

Nowadays the need for effective home plumbing is on the rise. The demand for products and equipment leads to some very innovative techniques that you can do yourself. Now is your chance to find something that works for your plumbing system. Here are some tips that you can use to get you started with doing your own plumbing.

Plumbing Giant

If a pipe ever freezes, you need to make sure to shut off the water. This will keep the pipe from bursting and causing you major damage to your home. Make sure to shut the water off at the main valve, and then open the faucet that is closest to the frozen pipe so it can drain while it is thawing out.

When concerned with plumbing, you need to know what can cause noisy pipes. This is important because it can mean the difference between an annoying noise and flooding in your house. Do your research to distinguish between the different noises and hire a professional if any serious risk is posed.

Do not pour grease or oil down any of your household drains. Put them in containers and place in the fridge until they are solid, then throw them away. If you pour them down the drain, they can solidify in cold pipes. These solid masses will clog your pipes and are very difficult to remove.

Schedule one plumber to take care of all your issues in one single visit. It might be tempting to hire a plumber for every little problem, but if you can save it up for one big fix, then you have time to set money aside for these repairs. Another reason it lowers costs is that plumbers bill per hour worked, and due to partial hour effects, doing all the work at once results in lower billable hours.

Have you tried patching your pipe with the store-bought patching kits only to have that section of your plumbing continue leaking? Replacing the damaged pipe is a more permanent solution than patching. First, you must shut off the main water valve, and drain the water from the damaged section. Cut out the damaged section of the copper pipe, leaving about an inch of extra pipe on both sides of the damaged area. Remove corrosion from inside the pipes with a wire brush. Apply flux to the replacement pipe and the remaining pipe. Slide the piece of replacement pipe into place with couplings. Apply solder all around the joint, and use a propane torch to solder the replacement section into place.

Installing efficient shower heads could save you a lot of money when it comes to your energy bill. A lot of the hot water that we use is used when we shower. A single energy efficient shower head can save you $100 a year.

If you notice water draining into your dishwasher, check how the kitchen sink hoses are installed. You must have the hose going uphill and then down to get rid of the water in the dishwater.

If you want to keep your kitchen drains from clogging up, don't pour grease down them. As it cools and congeals it can trap other food or waste particles, which over time can slow the draining of water and even form a clog that will not be easy to remove.

Don't start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Avoid using harsh chemicals to clear clogged drains by purchasing a hand-held manual auger. A drain auger is a one-time purchase as opposed to purchasing a new bottle every time a drain is clogged. This is especially helpful for people who deal with clogged drains often, such as people with long hair or kids who like to drop things down the drain.

Everyone in your home should know where the main water shut off valve is. By knowing where to find this valve, you'll be able to shut off the water in the event a pipe bursts, a bathtub or toilet overflows or any other emergency that requires you to turn off the water.

If you are trying to decide on the material to use for your hose, stick with stainless steel. Stainless steel has a very solid construction and stays durable for many years, eliminating the need for replacement. Also, this material is less prone to bursting, which can yield severe plumbing issues.

As you have read, there are many different ways to deal with and maintain your own plumbing. You need to find the treatment that works for you. There is a ton of information that can help you get started. By following these tips, you are well on your way to doing your own plumbing like a pro.

Plumbing Giant